English     
   
Technical Support : 400-029-1718
 
 
    Home       About Moshugroup      News      Products      Technology & Support      Contact
 
Home / Products / Temperature transmitter

Products for temperature measurement - Temperature transmitter

The task of transmitters is the transformation of the sensor signal into a stable and standardized signal. In the past, transmitters were built using analog technology. In the meantime digital technology has gained acceptance, however, because it offers better measurement accuracy at simultaneously higher flexibility, improve safety and safe costs.

In addition, the measurement accuracy in modern transmitters can be improved by use 'sensor-transmittermatching'. The complete measurement point can be calibrated in a loop (Sensor and transmitter together).

On the one hand, the standardized output signal in the process measurement is a 4...20 mA signal, but also the internationally standardized field buses, such as HART, PROFIBUS and FOUNDATION Fieldbus are used. The HART protocol serves mainly for a more convenient operation in combination with the 4...20 mA analog measured signal. PROFIBUS and FOUNDATION Fieldbus, however, transfer the real measured value digitally without any loss of accuracy and therefore offer cost savings by simplifying the wiring.

 Head transmitters

MS180 Temperature head transmitter
Universal PC programmable (PCP)
2 wire technology, 4 to 20 mA analogue output
High accuracy in total ambient temperature range
Configuration during measurement using configuration kit
Customer specific measurement range setting
Wide measurement range, according to requirement

MS181 Temperature head transmitter
Universally PC programmable (PCP)
Galvanic isolation
2 wire technology, 4 to 20 mA analog output
High accuracy in total ambient temperature range
Fault signal on sensor break or short circuit
Configuration during measurement using configuration kit
Customer specific measurement range setting
Wide measurement range, according to requirement
Output simulation

MS182 Temperature head transmitter
Universal settings with HART-protocol
Operation, visualisation and maintenance via PC or MS182 operating software
2 wire technology, 4 to 20 mA analog output
High accuracy in total ambient temperature range
Fault signal on sensor break or short circuit
Ex-Certification
Galvanic isolation
Max/Min process value indicator function
Configuration during measurement using configuration kit
Wide measurement range, according to requirement
Analog or digital output
Customer specific measurement range setting

MS183 Temperature head transmitter
Universal settings with HART-protocol
Operation,visualisation and maintenance via PC or MS183 operating software
2 wire technology, 4 to 20 mA analog output
High accuracy in total ambient temperature range
Fault signal on sensor break or short circuit
Ex-Certification
Galvanic isolation
Output simulation or digit
Customer specific measurement range setting
 
 Field transmitters

MS190 Temperature field transmitter
Universal PC programmable (PCP)
2 wire technology, 4 to 20 mA analogue output
Digital display (LED,LCD)
High accuracy in total ambient temperature range
Configuration during measurement using configuration kit
Ex-Certification
IP67aluminum alloy casing,IP65plastic casing
Output simulation
Customer specific measurement range setting

MS191 Temperature field transmitter
Universal PC programmable (PCP)
Two-wire technology, analog output 4 to 20 mA
Digital display (LED,LCD)
Highly accurate in entire operating temperature range
Configuration during measurement using configuration kit
Sensor monitoring: Failure conditioning in event of sensor break or sensor short-circuit
Ex-Certification
IP67aluminum alloy casing,IP65plastic casing
Galvanic isolation
Output simulation

MS192 Temperature field transmitter
Universal programmable with HART-protocol
Two-wire technology, analog output 4 to 20 mA
Digital display (LED,LCD)
Operation, visualisation and maintenance with PC or MS182 operating software
Max/Min process value indicator function
Highly accurate in entire operating temperature range
Configuration during measurement using a PC or via the HART communication
Sensor monitoring: Failure conditioning in event of sensor break or sensor short-circuit
Ex-Certification
IP67aluminum alloy casing,IP65plastic casing
Galvanic isolation
Output simulation or digit

MS199 Temperature field transmitter
Universally PC programmable (PCP)
Only 8V within its whole loop circuit
Two-wire technology, analog output 4 to 20 mA
LED Display
Operation, visualization and maintenance with PC
Highly accurate in entire operating temperature range
Sensor monitoring: Failure conditioning in event of sensor break or sensor short-circuit
Ex-Certification
IP67aluminum alloy casing,IP65plastic casing
Galvanic isolation
Output simulation
 
 DIN-rail transmitters

MS130 Temperature DIN-rail transmitter
2-wire technology, 4 to 20mA analogue output
Loop-powered, without external power supply
Wide measurement range
Ultra low power internal design, low temperature drift
High accuracy in entire operating temperature range

MS131 Temperature DIN-rail transmitter
2-wire technology, 4 to 20mA analogue output
Loop-powered, without external power supply
Wide measurement range, according to requirement.
Ultra low power internal design, low temperature drift
High accuracy in entire operating temperature range

MS132 Temperature DIN-rail transmitter
2-wire technology, 4 to 20mA analogue or HARTCProtocol digital output
Universal settings with HART-protocol
Loop-powered, without external power supply
Max/Min process value indicator function
Wide measurement range, according to requirement.
Ultra low power internal design, low temperature drift
High accuracy in entire operating temperature range

MS140 Temperature DIN-rail transmitter
2-wire technology, 4 to 20mA/1-5V DC voltage analogue output
Power supply mode:24V DC
Ultra low power internal design, low temperature drift
Sensor Warning function
High accuracy in entire operating temperature range
Customer specific measurement range setting

MS141 Temperature DIN-rail transmitter
2-wire technology, 4 to 20mA/1-5V DC voltage analogue output
Power supply mode:24V DC
Cold junction accuracy:1
High accuracy in entire operating temperature range
Wide measurement range, according to requirement.
Ultra low power internal design, low temperature drift
Sensor Warning function

MS142 Temperature DIN-rail transmitter
2-wire technology, 4 to 20mA/1-5V DC voltage analogue output
Power supply mode:24V DC/220V AC
Cold junction accuracy:1
High accuracy in entire operating temperature range
Wide measurement range, according to requirement.
Ultra low power internal design, low temperature drift
Sensor Warning function

MS149 Temperature DIN-rail transmitter
2-wire technology, 2-way 4 to 20mA/1-5V DC analogue output
Power supply mode:220V AC
Ultra low power internal design, low temperature drift
Sensor Warning function
High accuracy in entire operating temperature range
 
 Display Components

MS177 Temperature transmitter Display Components
Aluminum alloy or engineering plastic casing
High protection level (Aluminum alloy ,IP67)(Engineering plastic, IP65)
High reliability in harsh industrial environments
Ex-Certification
Loop-powered, without external power supply
Ultra low power internal design, low temperature drift
High accuracy in entire operating temperature range

MS178 Temperature transmitter Display Components
Aluminum alloy or engineering plastic casing
Digital display (LED)
High protection level (Aluminum alloy ,IP67)(Engineering plastic, IP65)
High reliability in harsh industrial environments
Ex-Certification
Loop-powered, without external power supply
Ultra low power internal design, low temperature drift
High accuracy in entire operating temperature range

MS179 Temperature transmitter Display Components
Aluminum alloy or engineering plastic casing
Digital display (LED,LCD)
High protection level (Aluminum alloy ,IP67)(Engineering plastic, IP65)
High reliability in harsh industrial environments
Ex-Certification
Loop-powered, without external power supply
Ultra low power internal design, low temperature drift
High accuracy in entire operating temperature range
 
 Multi-channel transmitters

MS150 Temperature Multi-channel transmitters
Multi-channel input, single output
4 to 20 mA analog output
Galvanic isolation from input to output
The highest temperature for output displaying
High accuracy in total ambient temperature range
IP66aluminum alloy casing,IP62plastic casing
Digital display (LED)

MS151 Temperature Multi-channel transmitters
multi-channel input,single output
4 to 20 mA analog output
Only 8 V voltage drop within whole loop circuit
Galvanic isolation from input to output
The highest temperature for output displaying
Fault signal on sensor break circuit
High accuracy in total ambient temperature range
Ex-Certification
IP66aluminum alloy casing
Digital display (LED)
Anti-RFI- Certification( especially for intercom)

MS152 Temperature Multi-channel transmitters
Multi-channel input; high selector,low selector ,data scaning or digital output
Universal settings with HART-protocol
Operation, visualisation and maintenance via PC or HART-protocol
2 wire technology, 4 to 20 mA analog output
High accuracy in total ambient temperature range
Fault signal on sensor break or short circuit
Digital display (LED)
IP66aluminum alloy casing
Galvanic isolation from input to output
Wide voltage supply range
Anti-RFI- Certification( especially for intercom)
Customer specific measurement range setting

 

 
 
 
Head transmitters
Field transmitters
DIN-rail transmitters
Display Components
Multi-channel transmitters
 
 
 
 
 ©2002-2013 MoShu Group.